Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Battery on Peugeot 208 - 2008 1.6 HDI

Model: Peugeot 208 A9, MK 1 - Years 2012-2019
Part: Battery

In this video tutorial, you will learn how to remove and replace the engine battery on a Peugeot 2008 1.6 HDI in simple steps. First, open the bonnet of your car and start by loosening the two battery terminals (positive and negative) using a 10 mm spanner. Next, remove the side control unit by pulling it upwards, as shown in the video. At this point, unclip the side plastic tabs to extract the battery by lifting it upwards; simply replace it with a new one of the correct type and with the same amperage!

Updated on 14 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How and When to Replace the Timing Belt on the Peugeot 208 1.6 HDI
How and When to Replace the Timing Belt on the Peugeot 208 1.6 HDI
Peugeot 208 (2012-2019 / A9, MK 1) Today's guide provides the main instructions for removing and replacing the timing belt on the Peugeot 208 1.6 HDI; for this engine type, the manufac…
How to Replace the Diesel Filter on the Peugeot 208 1.6 HDI
How to Replace the Diesel Filter on the Peugeot 208 1.6 HDI
Peugeot 208 (2012-2019 / A9, MK 1) In today's tutorial video, learn how to remove and replace the diesel filter on the Peugeot 208 with a 1.6 HDI engine. First, open the bonnet of your…
Refilling Ad Blue in a 2017 Peugeot 208 1.6 HDI
Refilling Ad Blue in a 2017 Peugeot 208 1.6 HDI
Peugeot 208 (2012-2019 / A9, MK 1) The video shows how to refill Ad Blue in the respective tank of a 2017 Peugeot 208 1.6 HDI. This is a very simple operation that can be done without …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos