Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 206
    4. : How do I replace the fuel pump on the Peugeot 206?

Peugeot 206 - Video tutorial

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Fuel pump
Operation: How do I replace the fuel pump on the Peugeot 206?

To be able to replace the fuel pump of the Peugeot 206 you must first open the hood and disconnect the three breather pipes of the engine, so that you can access the fuel pressure relief valve. You will have to manually open the valve as shown in the video to depressurize the fuel flow system. At this point it will be possible to lift the rear passenger seat from the driver's side, in order to access the pump below: this can be disconnected from the cables and extracted from its housing after loosening the bolts.


Posted on 7 May 2024 by ScegliAuto



How to disassemble the fuel pump of the Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Let's go and see the procedure necessary for the disassembly and replacement of the fuel pump of the Peugeot 206. First of all, open the rear doors a
How to replace the fuel pump in Peugeot 206
Peugeot 206 (1998-2012 / MK 1) In today's video we see how to replace the fuel pump in the Peugeot 206. First we open the rear door and lift the sofa. Now we remove the lid and the
Where is the fuel pump located in the Peugeot 206?
Peugeot 206 (1998-2012 / MK 1) In this video, we can see where the fuel pump is located in the Peugeot 206, useful in case we need to replace it or its float. As shown, the pump is

Other guides that may interest you

    Frequently Asked Questions

    • 206 1998-2012 - What is the price of the fuel pump for the Peugeot 206? Read Answer
    • 206 1998-2012 - What is the location of the fuel pump on the Peugeot 206? Read Answer
    • 206 1998-2012 - Where is the Peuget 206 petrol float located? Read Answer

How do you reset the tire pressure warning light on Hyundai I10?

In order to reset the tire pressure warning light on the Hyundai I10 there is no procedure that can be carried out independently. First of all, the flat tires must be returned to the correct inflation pressure, indicated on the sticker stuck in the driver's door pillar. Once the tire in question has been inflated, a diagnostic tool can be connected to the vehicle's OBD port so that the error can be reset. By following the procedure indicated in the tutorial, it will be possible to reset the warning light and turn on the ignition to check that everything has been done correctly.

Watch the video!


by ScegliAuto

More videos