Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 206
    4. : V-belt replacement instructions

Peugeot 206 - Video tutorial

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: V-belt
Operation: V-belt replacement instructions

The auxiliary or service belt has the function of generally dragging the alternator, air conditioning compressor and power steering pump: in order to replace it, loosen the tensioner and remove the belt, memorizing the various passages between the pulleys (it will be necessary to move a support bracket); then apply the new belt after comparing the number of grooves and the length with the original; then pass the belt between the pulleys and tension the relative tensioner. Replacement of the service belt is generally neglected due to the fact that its breakage generally does not cause any permanent damage.


Posted on 5 August 2023 by ScegliAuto



Distribution replacement of a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) We remove the timing belt of the Peugeot 206 if it needs to be changed. Changing the timing belt is very important in order not to damage the engine.
Peugeot 206 service belt replacement
Peugeot 206 (1998-2012 / MK 1) Using a ratchet wrench, unscrew the bolts of the pin under the belt and of the fixing pin (see video demonstration). Unscrew the belt tensioner with
Repair of the alternator with replacement of the belt
Peugeot 206 (1998-2012 / MK 1) Disconnect the negative pole of the battery and move the cable away. Raise the car on the bridge, open the bonnet and unscrew the screws holding the

Other guides that may interest you

How do you open the fuel flap of the Volkswagen Golf 5?

In order to open the fuel flap of the Volkswagen Golf 5, you need to press the appropriate button inside the passenger compartment, which is located in the rear part of the glove box on the driver's door. By pressing the button, the flap will unlock and it will then be possible to open it manually. Once the flap has been opened, the fuel tank access cap must be unscrewed. To close everything again, it will be sufficient to screw the tank cap again; subsequently, the flap must also be closed, pressing it so that it fits thanks to its locking mechanism.

Watch the video!


by ScegliAuto

More videos