Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Engine Oil and Filter

Model: Peugeot 308 T7, MK 1 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Oil filter

See other generations:
Video tutorial

Lift the vehicle to facilitate access to the oil sump, placing it on suitable axle stands and ensuring it remains level; remove the plastic undertray from beneath the chassis and position a container under the oil drain plug to collect the used oil; then unscrew the plug and while the oil drains, access the engine compartment to replace the filter located near the gearbox; to replace the filter, it is necessary to remove the battery compartment cover and the air duct; once you reach the filter location, unscrew the cap, remove the old cartridge, and insert the new one using the new O-ring seal kit, which must be lubricated with clean oil before installation; finally, tighten the drain plug under the oil sump using a new copper washer and fill the engine with clean oil until the correct level is reached.


Updated on 15 February 2026 by ScegliAuto


Related tutorials

Oil change and filter replacement for Peugeot 308 II diesel.
Oil change and filter replacement for Peugeot 308 II diesel.
Peugeot 308 (2013-2021 / T9, MK 2) In this video, we will see how to change the oil and filter on the Peugeot 308 II diesel: we open the hood and the oil filler cap, then we lift the f…
How to Reset the Service Light for a 2021 Peugeot 308
How to Reset the Service Light for a 2021 Peugeot 308
Peugeot 308 (2013-2021 / T9, MK 2) In this video tutorial, you will see how to reset the service light for a service on a 2021 Peugeot 308 by following a few simple steps: the first th…
Oil Change for Automatic Gearbox on Peugeot 308
Oil Change for Automatic Gearbox on Peugeot 308
Peugeot 308 (2007-2014 / T7, MK 1) To perform this operation on an automatic gearbox, unlike a manual gearbox, you need the appropriate machinery. If you do not have it and do not wish…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos