Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instrument Cluster Bulb Replacement

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Instrument panel light

If the display in the centre of the instrument cluster remains off when the ignition is turned on, it means the backlight bulb has blown (you can confirm this if the numbers appear when you try to illuminate the display); to replace this bulb, you need to remove the instrument cluster: first, lower the steering wheel adjustment fully down, detach the trim around the instrument cluster and unscrew the securing screw; pull the cluster away from its seat, disconnect the rear connectors and proceed to replace the bulb by detaching the bulb holder and removing the old bulb to insert the new one (T5 fitting); reverse the process for reassembly.

Updated on 15 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Dashboard Bulb Replacement
Dashboard Bulb Replacement
Peugeot 206 (1998-2012 / MK 1) If the display in the centre of the dashboard is not clearly visible, there may be a problem with the backlighting bulb. Replacing it is very simple …
Replacing Instrument Cluster Bulbs
Replacing Instrument Cluster Bulbs
Peugeot 206 (1998-2012 / MK 1) To replace the backlighting bulbs of the instrument cluster, it is necessary to remove it; to facilitate removal, lower the steering wheel adjustment…
Replacement of Front Headlamp Bulb
Replacement of Front Headlamp Bulb
Peugeot 206 (1998-2012 / MK 1) Replacing the front headlamp bulb is one of the simplest DIY maintenance tasks, unless it requires removing the headlamp itself or the entire bumper,…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos