Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Micro Switch on the Indicator Lever

Model: Peugeot 406 MK 1 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Push button

This video is currently unavailable

The indicator lever contains an integrated micro switch that can be replaced, as the spare part is available in the aftermarket. To replace it, you need to remove the indicator lever from the steering column and then open it into the two parts that compose it. Once the indicator is removed from the column, secure the airbag tape ring to prevent it from rotating, disconnect the radio control lever, extract the central spring, and separate the upper part housing the airbag tape from the lower part that supports the levers and houses the electronic circuit.

To separate the two elements, disengage the snap tabs along the edges. After separating the two elements of the indicator, pull the lever outward to access the micro switch: pull it out with pliers and insert the new one. Proceed in reverse for reassembly.


Updated on 15 February 2026 by ScegliAuto


Related tutorials

Replacing the Number Plate Light and Checking Bulb Holder Contacts
Replacing the Number Plate Light and Checking Bulb Holder Contacts
Peugeot 406 (1995-2005 / MK 1) First, switch on the light switch and check if one or more of the number plate lights are functioning. If you need to replace them, gently pry off th…
Replacing Dashboard Light Bulbs
Replacing Dashboard Light Bulbs
Peugeot 406 (1995-2005 / MK 1) Replacing the backlighting lights of the climate control display is very simple. Using a small flathead screwdriver, detach the caps located on the s…
Car Gearbox Replacement
Car Gearbox Replacement
Peugeot 406 (1995-2005 / MK 1) Replacing the gearbox in any car is a straightforward task. By following the simple steps in this guide, you can complete the operation without issue…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos