Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the air filter on the Peugeot 208

Model: Peugeot 208 MK 1, A9 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Air filter

See other generations:
Video tutorial

Among the tasks to be performed during a service on the Peugeot 208 is the replacement of the air filter. To do this, open the bonnet of the engine compartment.

You will find the air filter housing on the driver's side near the grille. Start by disconnecting the small ventilation hose, loosen the clamp on the outlet connection, unscrew the securing screw at the top, and disconnect the inlet hose.

You can then remove the filter box and place it on a workbench for easier access. Unscrew the screws that secure the cover, remove the old filter, and clean the inside with compressed air. Fit the new filter ensuring the rubber edge is seated properly, replace the cover, and secure it with its screws.

Refit the filter box and restore the connections.


Updated on 20 August 2026 by ScegliAuto


Related tutorials

Replacing the Engine Air Filter on Peugeot 208
Replacing the Engine Air Filter on Peugeot 208
Peugeot 208 (2012-2019 / MK 1, A9) In this tutorial, learn how to remove and replace the engine air filter on a first series Peugeot 208. First, open the engine bonnet and use a socket…
How to replace the cabin air filter of the Peugeot 208
How to replace the cabin air filter of the Peugeot 208
Peugeot 208 (2019-2026 / UP, UW, UB, UJ, MK 2) Replacing the cabin air filter in your second-generation Peugeot 208 is very simple. To complete the operation, you must read the following guide and…
Replacing the Cabin Air Filter on the Peugeot 208 MK2
Replacing the Cabin Air Filter on the Peugeot 208 MK2
Peugeot 208 (2019-2026 / UP, UW, UB, UJ, MK 2) To ensure that clean air circulates in the ventilation system of the Peugeot 208, an air filter has been installed at the external air intake that mu…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos