Do it yourself
| ||||
|
Peugeot 207 - Video tutorial
Model: Peugeot 207
MK 1
- Years 2006-2015 Today's guide will show us how to disassemble and replace the thermostat of the Peugeot 207 1.6 16 valve, following the instructions below. First, we lift the car and start disconnecting the coolant tube, allowing the fluid to drain into a container for about ten minutes. Then, we open the engine hood and disconnect the thermostat tube, followed by disconnecting the electrical connector, as shown in the video. At this point, we unscrew the thermostat screws to remove it and replace it with the new original one, reassembling everything and topping it up with the new antifreeze fluid!
Posted on 20 October 2023 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow to reset the service in the Opel Antara?As we can see in this tutorial, resetting the service in the Opel Antara is an extremely simple and fast operation. Before proceeding, of course, we must have completed all the planned maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel, not the engine. At this point, we release the accelerator and press it 3 consecutive times, always all the way. We then restart the panel to verify that the procedure has been carried out correctly. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.012
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |