Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Timing Chain of the Peugeot 308?

Model: Peugeot 308 T7, MK 1 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Timing belt

See other generations:
Video tutorial

To replace the timing chain of the Peugeot 308, open the bonnet to access the components inside the engine bay. On the left side of the engine block, locate the panel that protects the chain. This can be removed after loosening the bolts that secure the tensioner; this will reduce the tension on the chain, allowing it to be extracted from its housing.

After removal, install the new chain around the sprockets and reassemble all previously removed components.


Updated on 28 August 2026 by ScegliAuto


Related tutorials

How to Replace the Timing Chain on a Peugeot 308
How to Replace the Timing Chain on a Peugeot 308
Peugeot 308 (2013-2021 / T9, MK 2) Open the bonnet to access the components inside the engine bay. On the left side of the engine block, locate the panel that protects the timing chain…
Replacement of the timing belt of the Peugeot 308 1.6 HDI
Replacement of the timing belt of the Peugeot 308 1.6 HDI
Peugeot 308 (2013-2021 / T9, MK 2) Below we will discover the instructions for disassembling and replacing the timing belt of the Peugeot 308 1.6 HDI. First, we open the hood of the ca…
Replacing the Timing Belt and Water Pump on the Peugeot 308 1.6 HDI
Replacing the Timing Belt and Water Pump on the Peugeot 308 1.6 HDI
Peugeot 308 (2013-2021 / T9, MK 2) Today, let's go through the steps necessary to remove and replace the timing belt and water pump on the Peugeot 308 1.6 HDI. First, raise the vehicle…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos