Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. Expert
    4. : Where are the fuses located in the Peugeot Expert?

Peugeot Expert - Video tutorial

Model: Peugeot Expert Mark2, MK 2 - Years 2008-2016
Part: Fuse box
Operation: Where are the fuses located in the Peugeot Expert?

All the fuses of the Peugeot Expert are contained within the appropriate fuse boxes, which are installed on the vehicle. In this type of vehicle, there are three boxes that contain the fuses: the first one is located inside the passenger compartment, at the bottom left of the steering column. It contains the fuses for the air conditioning, airbags, etc. The second box is instead positioned under the passenger footwell: this contains the fuses for the heated seats, sliding door, etc. Finally, the last box located inside the engine compartment contains the fuses for the windshield wipers, horn, etc.


Posted on 4 December 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Expert 2008-2016 - Where are the fuses located in the Peugeot Expert? Read Answer
    • Expert 2008-2016 - Where is the Peugeot Expert window lift fuse located? Read Answer
    • Expert 2008-2016 - What is the Peugeot Expert air conditioning fuse? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos