Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where to Find the Fuses in a Peugeot Partner

Model: Peugeot Partner Tepee B9 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Fuse box

See other generations:
Video tutorial

The fuse boxes of the Peugeot Partner Tepee are located in the cabin to the left of the steering wheel at the bottom, where you will find a cover with a slot to insert your hand; pull this cover downwards. Once pulled, you will find the fuses at the back of the compartment.

In the engine bay, the fuse box is located to the right of the battery; by acting on the side tabs, remove the cover of the box; after removing the cover, you will find the fuses. To replace a fuse, identify the fuse corresponding to the faulty component, grasp it with small pliers, remove it, and check if the bridge inside is intact.

If the bridge inside the fuse is broken, replace the fuse with one of the same amperage.


Updated on 1 October 2026 by ScegliAuto


Related tutorials

Where are the Fuses Located on the Peugeot Partner?
Where are the Fuses Located on the Peugeot Partner?
Peugeot Partner Tepee (1996-2013 / MK 1) The fuses of the Peugeot Partner are divided between two fuse boxes installed in the vehicle. In this model, the first box can be found behind the gl…
Where are the Fuses in a Peugeot Partner?
Where are the Fuses in a Peugeot Partner?
Peugeot Partner Tepee (2008-2018 / B9) The fuses in a Peugeot Partner are located within dedicated fuse boxes inside the vehicle: this model has two boxes. The first is found inside the ca…
Where are the fuses located on a Peugeot Partner?
Where are the fuses located on a Peugeot Partner?
Peugeot Partner Tepee (2008-2018 / B9) In the Peugeot Partner, the fuses are divided among the designated fuse boxes installed in the vehicle. In this model, there are three fuse boxes. Th…

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos