Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Inner Door Trim of a Peugeot 308

Model: Peugeot 308 T7, MK 1 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Car door

See other generations:
Video tutorial

Have you decided to DIY the door trim panel of your car? Be aware that the method for performing this task is generally standard, so whether it’s a Peugeot 308 or another car, the process is the same. Start by removing the handle, then move on to the grab handle with the associated electric window controls, and finally, remove all the perimeter clips.

After doing this, simply pull the aforementioned panel to remove it, ensuring you disconnect the electrical connector clips at the back.


Updated on 14 October 2026 by ScegliAuto


Related tutorials

How to Remove the Door Panel on the Peugeot 308?
How to Remove the Door Panel on the Peugeot 308?
Peugeot 308 (2013-2021 / T9, MK 2) To remove the door panel on the Peugeot 308, use a tool to lever off the trim around the corresponding grab handle. This will allow you to loosen all…
How to Remove the Door Panel of a Peugeot 308
How to Remove the Door Panel of a Peugeot 308
Peugeot 308 (2007-2014 / T7, MK 1) This guide shows how to remove the door panel of a Peugeot 308 (passenger side). First, use a trim tool to pry around the internal door handle. Next,…
How to replace the door panel on the Peugeot 308?
How to replace the door panel on the Peugeot 308?
Peugeot 308 (2013-2021 / T9, MK 2) To replace the door panel on the Peugeot 308, use a tool to pry off the trim of the armrest located in the centre of the panel. Underneath the trim a…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos