Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the rear door trim panel of the Peugeot 308.

Model: Peugeot 308 T9, MK 2 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Door trim panel

See other generations:
Video tutorial

Let's see how to disassemble the rear door panel of a Peugeot 308: we start by removing the internal handle trim of the door, then we take off the cover of the screw located in the handle area, and unscrew the screw to remove the power window switch panel.

Next, we disconnect the electrical connector.

At the bottom of the panel, we find a screw that we will remove; then we will begin to pry all around the panel to detach it. Once it is loosened, we pull it towards us and upwards to remove it, being careful not to lose the metal clips that will certainly fall, as they will be essential for reassembly, which can be done by simply following the reverse process.


Posted on 29 December 2025 by ScegliAuto


Related tutorials

How to Remove the Rear Light of a Peugeot 308?
How to Remove the Rear Light of a Peugeot 308?
Peugeot 308 (2013-2021 / T9, MK 2) Hello! Today's guide aims to remove the rear light of our Peugeot 308. Start by opening the boot lid. Then, unscrew and remove the screws that secure…
Disassembly of the rear door panel of the Peugeot 308
Disassembly of the rear door panel of the Peugeot 308
Peugeot 308 (2013-2021 / T9, MK 2) In this short guide, we will see the instructions that will allow us to disassemble the rear door panel of the Peugeot 308. First, we open the rear d…
How to Remove the Rear Door Panel of a Peugeot 308 SW
How to Remove the Rear Door Panel of a Peugeot 308 SW
Peugeot 308 (2013-2021 / T9, MK 2) Before starting, open the rear door of your Peugeot 308 SW. Begin by prying out and removing the insert from the door panel's pillar using a thin but…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos