Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Porsche
    3. :
  3. 911
    4. : How to replace the pump in a short time

Porsche 911 - Video tutorial

Model: Porsche 911 996 - Years 1997-2005
Part: Pump
Operation: How to replace the pump in a short time

Do you need to replace the pump? The guide teaches you how to go about doing the task smoothly. Once the bonnet is opened at the bottom left you will find the pump screwed to the engine block with six screws with the bolt head. Once unscrewed, you can extract the pump from its seat by levering it with a screwdriver using good care in order not to damage anything. Once the pump has been removed from its location, you can also remove the gasket by cutting the threads that hold it in place with small shears. At this point you have finished the disassembly and you can replace it. Porsche 911 Carrera (996)


Posted on 30 June 2023 by ScegliAuto



Replacement of the Porsche 911 Carrera petrol pump
Porsche 911 (1997-2005 / 996) Let's see today in this short and simple guide that will allow us to disassemble and replace the petrol pump of the Porsche 911 Carrera. First of all
How to replace the water pump
Porsche 911 (1997-2005 / 996) This video illustrates how to replace the water pump of the Porsche 911. Start by unscrewing the two 13 mm screws that block the engine ventilation s
Replacement of the fuel pump of the Porsche 911 Carrera
Porsche 911 (1997-2005 / 996) Today we will see, in this video tutorial, how to disassemble and replace the fuel pump of the Porsche 911 Carrera, following the instructions below.

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos