![]() |
Do it yourself
| |||
|
Porsche Boxster - Video tutorial
Model: Porsche Boxster
986, MK 1
- Years 1996-2004 In this video you can see how to replace the speaker of the Porsche Boxter. First, with a star point like the one shown in the video, remove the two torx screws and lift the speaker. The support structure (or basket) is fixed to the mask by three screws; unscrew the three screws separated the basket from the template and then cut the support clamps. Now cut out the perimeter of the membrane of the old loudspeaker and cut the two wires after which remove the membrane itself from the cone. It is necessary to preserve the connector so, with great care, you will have to cut around it. You now have your ring mount. Now you have to mount the new cone (Alpine SPG10C2). First you will need to remove the fixing tabs. Now insert the new cone into the ring mount. Use some glue to join the two pieces. Once the glue has dried, solder the speaker wires to the connector poles. Now you just have to reassemble the speaker, reconnect it to the power supply and reassemble the bezel.
Posted on 1 July 2023 by ScegliAuto
![]() Porsche Boxster (2012-2015 / MK 3, 981) Let's briefly see the instructions that will allow us to disassemble and replace the front headlight of the Porsche Boxster, following these simple a ![]() Porsche Boxster (1996-2004 / 986, MK 1) Let's see today the instructions that will allow us to disassemble and replace the fuel pump of the Porsche Boxster, in simple steps. First we open t ![]() Porsche Boxster (1996-2004 / 986, MK 1) Let's see in this video how to remove and replace the key remote control battery on the Porsche Boxster first series, from 1996 to 2004, by following Other guides that may interest you
|
How do I replace the Land Rover Evoque auxiliary battery?![]() In order to replace the auxiliary battery of the Land Rover Evoque, it is necessary to go inside the passenger compartment and remove the panel which is positioned immediately under the glovebox. Once the screws that secure this panel have been loosened, it will be possible to access the components located in its rear part, including the auxiliary battery. The latter must be disconnected from its cables and the fixing screws must be loosened. The battery can then be replaced with a new one and the panel can be fixed again with its screws. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.048
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |