|
Do it yourself
| |||
| ||||
How to Change Engine Oil and Oil Filter
Model: Porsche 911
996
- Years 1997-2005
This video illustrates the steps to change the oil and replace the filter on a Porsche 911. Once the car is positioned on a lift, remove the oil pan cover by unscrewing the three fastening bolts. To unscrew the pan plug, you can use either a ratchet wrench or a standard hex wrench with the aid of a combination wrench (using the ratchet wrench is recommended). Unscrew the plug and let the oil drain out (collecting it in a container). It is better to work with the engine cold. Now, loosen the plastic cover of the filter (using a ratchet wrench fitted with a cavity the size of the filter), then, once removed, you can unscrew the filter cap and let the residual oil drain out. After allowing it to drip for a few minutes, you can install the new filter. In this new filter package, you will also find the plug for the oil pan and the gasket for the plastic filter cover. Now you can screw the pan plug back in (along with its washer); also insert the new filter and its plastic cover and screw them back in. Reattach the oil pan cover. Now you can lower the lift and finally pour in the new engine oil!
Updated on 4 February 2026 by ScegliAuto
Video tutorial
Related tutorials
Porsche 911
(2019-2026 /
992)
Thanks to the author of this video, we can learn how to change the engine oil in a latest version Porsche 911. As always, it is necessary to unscrew …
Porsche 911
(1997-2005 /
996)
This video shows you how to replace the engine oil and filter in your car. First, locate the drain plug on the oil pan to let the oil out. Once found…
Porsche 911
(2005-2011 /
997)
Today, let's explore the guide on how to perform routine maintenance by changing the engine oil and oil filter on the Porsche 911. First, lift the ve…
Other guides you may be interested in
|
How to Replace the Battery on a Honda Vision 110
To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.197
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |