Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Serpentine Belt

Model: Porsche 911 996 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: V-belt

See other generations:
Video tutorial

To access the replacement of the auxiliary belt, first remove the engine air filter housing along with the intake ducts. Be sure to disconnect the mass air sensor connector before removing the housing from its position.

At this point, before removing the belt, note its correct routing around the various pulleys. Loosen the tensioner by turning it clockwise to remove the old belt.

Then, check the free rotation of the bearings and install the new belt, ensuring it properly adheres to the pulleys.


Updated on 5 February 2026 by ScegliAuto


Related tutorials

How to change the battery of the Porsche 997 key
How to change the battery of the Porsche 997 key
Porsche 911 (2005-2011 / 997) In this article, we will explain how to replace the battery of the Porsche 997 key in case the battery runs out. To replace the battery, you will nee…
Removing and Replacing Windshield Wipers
Removing and Replacing Windshield Wipers
Porsche 911 (1997-2005 / 996) This video shows how to remove and replace the windshield wipers on your car. If over time or due to exposure to various weather conditions your wipe…
How Much Does It Cost to Replace the Intermediate Shaft Bearing on a Porsche 911
How Much Does It Cost to Replace the Intermediate Shaft Bearing on a Porsche 911
Porsche 911 (1997-2005 / 996) The intermediate shaft bearing can be found online for a price ranging from $30 to $50. If you plan to purchase the entire kit related to the shaft (…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos