Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How Much Does It Cost to Replace the Intermediate Shaft Bearing on a Porsche 911

Model: Porsche 911 996 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Bearing

See other generations:
Video tutorial

The intermediate shaft bearing can be found online for a price ranging from $30 to $50. If you plan to purchase the entire kit related to the shaft (including the shaft, pinion, and bearing), the cost will be around $700 to $800, depending on the brand you choose.

Unfortunately, many Porsche 911 - 996 models, produced from 1997 to 2005, have experienced the need to replace this part due to evident manufacturing errors.

If you intend to have the bearing or the entire shaft replaced by your mechanic, keep in mind the additional cost associated with the labor time required for the job.


Updated on 5 May 2026 by ScegliAuto


Related tutorials

Disassembly of Intermediate Shaft Bearing
Disassembly of Intermediate Shaft Bearing
Porsche 911 (1997-2005 / 996) Only perform this repair if you have the proper equipment and good mechanical knowledge, as it is necessary to disassemble the transmission, and any …
Intermediate Shaft Bearing Replacement
Intermediate Shaft Bearing Replacement
Porsche 911 (1997-2005 / 996) It is recommended to perform this repair only if you have good mechanical knowledge and the proper tools! The first step is to remove the transmissio…
How to Replace the Key Battery of a Porsche 911
How to Replace the Key Battery of a Porsche 911
Porsche 911 (1997-2005 / 996) Start by inserting the tip of a small flathead screwdriver into the key of your Porsche 911 and prying it open. This will expose the dead battery. Pr…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos