Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the light bulb on Dodge RAM 1500

Model: RAM 1500 DS, MK 4, DJ - Years 2009-2019
Part: Headlight bulb

Let's see how to replace the bulbs on Dodge RAM 1500. Remember that the entire headlight must be removed, so open the tailgate of the trunk and unscrew the torx that fix it laterally. At this point you can already extract the headlight from its seat and disconnect the connector by pressing on the tab and pulling. Now, with the light free, position yourself on a workbench. Now we just need to unscrew the three screws that secure the rear cover of the bulbs. We will find the stop light, arrow and reverse light in front of us: once we have reached this point, it is very simple to extract the exhausted bulb and insert the new one.

Posted on 12 December 2021 by ScegliAuto

Video tutorial

Related tutorials

How to change the transmission oil of the Dodge RAM 1500
How to change the transmission oil of the Dodge RAM 1500
RAM 1500 (2002-2009 / D1, DC, DH, DR, DM, MK 3) In today's video tutorial we will see how to replace the rear differential transmission oil of the Dodge RAM 1500. First, let's move to the rear of t…
How to replace the headlight bulbs in the Dodge RAM 1500
How to replace the headlight bulbs in the Dodge RAM 1500
RAM 1500 (2002-2009 / D1, DC, DH, DR, DM, MK 3) In this mini guide of ours we will find out how to correctly replace the headlight bulb in the Dodge RAM 1500. Fortunately, this is a rather simple o…
Replace the starter motor on the Dodge RAM 1500
Replace the starter motor on the Dodge RAM 1500
RAM 1500 (1994-2001 / BR, BE, MK 2) Let's replace the starter motor of the Dodge RAM 1500 together, following the instructions below. First of all we open the bonnet and we go to discon…

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos