Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the headlight bulbs on the Ram 3500

Model: RAM 3500 DS, DJ, MK 4 - Years 2009-2019
Part: Headlight bulb

Let's see in this video tutorial how to replace a headlight on a Ram 3500, model produced from 2009 to 2019. Let's start immediately by opening the engine hood and removing the radiator grille as shown in the video. Now to remove the headlight we need to unscrew the three nuts that hold it in place, the two front nuts are easily removed, while to access the rear nut you need to open a plastic flap located behind the headlight and inside the wheel arch. Once all this is done we can remove the lighthouse, and in doing so we have access to all the bulbs that we need to replace.

Posted on 4 October 2022 by ScegliAuto

This video is currently unavailable

Related tutorials

Where is the fuse box of the new RAM 3500
Where is the fuse box of the new RAM 3500
RAM 3500 (2019-2026 / MK 5, DT) In this new mini guide of ours dedicated to your brand new RAM 3500 from 2023, we're going to find out where the box containing all the various vehic…
How to reset the Ram 3500 oil warning light
How to reset the Ram 3500 oil warning light
RAM 3500 (2009-2019 / DS, DJ, MK 4) If you have just replaced the engine oil and its filter on your Ram 3500, but the warning light continues to turn on steadily, you must necessarily p…
How to change the engine oil on the RAM 3500 6.7L
How to change the engine oil on the RAM 3500 6.7L
RAM 3500 (2019-2026 / MK 5, DT) Let's see in this video how to carry out the regular maintenance service of the oil change of the RAM 3500 with 6.7 L engine. container for about ten…

Other guides you may be interested in

How to Remove the Front Seats from a Classic Fiat 500

How to remove the front seats from a classic Fiat 500? In this video, follow these steps: first, slide the seats forward and lift them up, then unscrew the retaining bolts on the rails fixed to the car's chassis using a socket or impact driver (use appropriate release agents if the bolts do not unscrew). Remove the retaining bolts at the bottom of the car (use spanners on both the upper and lower parts of the connecting bolts). Finally, install the new front seat by following the disassembly steps mentioned earlier.

Watch the video!


by ScegliAuto

More videos