Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear lights in the Renault Twingo?

Model: Renault Twingo Twingo 1 - Years 1993-2007
Part: Tail light

In this tutorial we can see how to replace the rear lights in the Renault Twingo, an extremely simple and fast operation. First of all, make sure that the key is not inserted, in order to operate safely, then open the rear hatch, locate the two plastic bolts located on the back of the light in question and unscrew them. Then lever along the perimeter of the headlight, pull it towards us and separate it from the bodywork. At this point we can disconnect the power connector, transfer the bulb to the replacement, if necessary, and reassemble everything.

Posted on 25 August 2024 by ScegliAuto

Video tutorial

Related tutorials

How to remove the rear seats of the Renault Twingo
How to remove the rear seats of the Renault Twingo
Renault Twingo (2014-2024 / Twingo 3, Twingo III) Below are the instructions on how to disassemble and replace the rear seats of the Renault Twingo. First, open the rear doors of the car and start un…
How to replace the front headlight bulbs in the Renault Twingo?
How to replace the front headlight bulbs in the Renault Twingo?
Renault Twingo (2014-2024 / Twingo 3, Twingo III) In this tutorial we can see how to replace the front headlight bulbs in the Renault Twingo, an extremely simple and quick operation. First of all, ma…
How to Remove the Front Headlights on a Renault Twingo?
How to Remove the Front Headlights on a Renault Twingo?
Renault Twingo (2014-2024 / Twingo 3, Twingo III) In this tutorial, you will learn how to remove the front headlights on a Renault Twingo. First, ensure the key is not inserted, then remove the two p…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos