Do it yourself
Frequently asked questions about cars and motorcycles

How do you remove the cabin fan in the Renault Scenic 2?

Model: Renault Scenic MK 2, Scenic 2 - Years 2003-2009
Part: Blower motor

The cabin fan, the one that pushes air inside the car, could suddenly stop working due to a blocked bearing or because its electrical circuit is burnt and needs to be replaced. The tutorial published here shows a Renault Megane 2, but the same method can be applied to the Renault Scenic 2, everything is identical. Let's see what the operational sequence is: the plastic coverings under the steering wheel are removed to access the fan in question, which is blocked with screws to be removed and equipped with a connector for the electrical power cables to be disconnected before extracting it.

Posted on 27 October 2024 by ScegliAuto

Video tutorial

Related tutorials

Renault Scenic (2009-2015 / Scenic 3, MK 3, MK III, Scenic III) If you want to quickly locate the OBD port of your Renault Scenic Mk3, all you have to do is carefully follow the instructions described in this new …
Renault Scenic (2016-2022 / MK IV, Scenic 4, MK 4, Scenic IV) This guide shows how to remove the plastic shell of the external rear-view mirror on a Renault Scenic Mk4. After fully extending the mirror, use a sm…
Renault Scenic (2016-2022 / MK IV, Scenic 4, MK 4, Scenic IV) In this tutorial we can see how to disassemble the door panel in the Renault Scenic, an extremely simple and quick operation. First of all, we open t…

Other guides you may be interested in

    Frequently Asked Questions

    • Scenic 2009-2015 - What to do if the fan does not work on Renault Scenic? Read answer
    • Scenic 2009-2015 - Where is the heater fan resistor of the 2010 Renault Scenic located? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos