Do it yourself
Frequently asked questions about cars and motorcycles

How to reset the "Service" light on a Renault Megane?

Model: Renault Megane Megane IV, Megane 4 - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Service warning light

See other generations:
Video tutorial

To reset the "Service" light on a Renault Megane, turn on the dashboard without starting the engine. Use the buttons on the steering wheel to navigate through the onboard computer menu.

Press the "OK" or "SET" button to access the main menu and, using the directional keys, scroll to the "Maintenance" or "Service Intervals" section. Once you have found the option to reset the service, select it by pressing "OK" again.

At this point, a confirmation request will appear on the display. Press and hold the button for a few seconds until the reset is completed.

After performing the reset, turn off and turn on the dashboard to verify that the "Service" light has been properly eliminated. If the problem persists, it may be necessary to consult the vehicle manual or contact an authorized workshop for further checks.


Posted on 2 January 2025 by ScegliAuto


Related tutorials

Renault Megane (2015-2023 / Megane IV, Megane 4) The service light indicates that the car requires routine maintenance (the so-called service). Only after completing this maintenance can you proceed…
Renault Megane (2015-2023 / Megane IV, Megane 4) Resetting the oil service light on the Renault Megane is very simple; let's see how to do it in this tutorial. Of course, the light should only be re…
Renault Megane (2008-2015 / Megane III, Megane 3) How to reset the service light on your Renault Megane. Enter the vehicle and turn on the instrument panel with the key. Press the button located near…

Other guides you may be interested in

    Frequently Asked Questions

    • Megane 2008-2015 - How do you reset the Renault Megane Service warning light? Read answer
    • Megane 2015-2023 - How to reset the "Service" light on a Renault Megane? Read answer

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos