Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the TPMS light on the Renault Captur

Model: Renault Captur MK 2 - Years 2019-2026
Part:

When the tpms warning light on the Renault Captur instrument panel lights up continuously, it means that it is necessary to check and adjust the tire pressure. To check the tire pressure, we need to use a pressure gauge and an air compressor. Tires should always be checked when cold, and it is important to follow the parameters suggested by the manufacturer. To reset the warning light, we need to press the menu button on the steering wheel and use the arrow buttons to select the "tire pressure" option; by holding down the OK button, we will start the pressure update process. Through the onboard computer via the information card, it is possible to check the tire pressure system in order to keep an eye on the tire condition.

Posted on 11 May 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the TPMS Light on a Renault Captur
How to Reset the TPMS Light on a Renault Captur
Renault Captur (2019-2026 / MK 2) After inflating all four tyres and checking them according to the instructions on the stickers located on the door sills, you can reset the TPMS ligh…
How to reset the TPMS light on a Renault Captur
How to reset the TPMS light on a Renault Captur
Renault Captur (2019-2026 / MK 2) The TPMS warning light comes on in a Renault Captur when it is necessary to adjust the tire pressure. Once the tire pressure has been adjusted, follo…
How to reset the service light on the Renault Captur
How to reset the service light on the Renault Captur
Renault Captur (2013-2019 / MK 1) Today we will explain how to reset the tire pressure warning light, also known as TPMS, on a Renault Captur vehicle. Before performing the reset, it …

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos