Do it yourself
Frequently asked questions about cars and motorcycles

How to change engine oil and filter on Renault Trafic II

Model: Renault Trafic MK 2 - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Engine oil

See other generations:
Video tutorial

To change the oil on the Renault Trafic II, we open the hood, lift the front of the car, and then open the oil filler cap to facilitate draining. We place a large container under the drain plug of the oil pan and open it. We let the used oil drain out, which we will dispose of properly, along with the filter, at an authorized center.

We will need another container under the filter, located on the right side of the engine, at the top. We clean the filter seat thoroughly with a cloth and apply a thin layer of oil to the gasket of the new filter and screw it back on by hand. We put a new bolt and gasket on the oil pan and lower the car back to the ground.

We pour about 90% of the recommended oil quantity into the filler cap. We start the engine for 30 to 60 seconds to fill the filter and then turn it off. We wait a few minutes and check the level, topping it up until we reach the "max" level, being careful never to exceed it.


Posted on 20 December 2025 by ScegliAuto


Related tutorials

Renault Trafic (2014-2026 / MK 3) To perform a basic service on the Renault Trafic, you will need: engine oil that meets the specifications indicated for the vehicle, an oil filter, a…
Renault Trafic (2014-2026 / MK 3) To change the engine oil and filter on a Renault Trafic, position the vehicle on a flat surface and safely lift it to access the underside. Place a c…
Renault Trafic (2014-2026 / MK 3) In this video, you will see how to change the engine oil on a Renault Trafic III: First, open the oil filler cap to facilitate drainage, and add a pr…

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos