Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Oil Filter on a Renault Clio

Model: Renault Clio Clio 2, MK 2 - Years 1998-2005
Part: Oil filter

Replacing the oil filter on a Renault Clio? Here’s how to do it. Lift the car on a column lift, unscrew the wheel bolts and remove the wheel (right side). Remove the plastic panel covering the wheel (wheel arch liner). Using a strap wrench, unscrew the cartridge oil filter; let the fluid drain into a container. Install the new filter in its housing. Refit the wheel arch liner, then the wheel with the securing bolts. Replace the engine oil along with the filter. Top up with new fluid and close the bonnet.

Updated on 18 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) Today's instructions will allow you to carry out the routine maintenance service by replacing the engine oil and oil filter in the Renault Clio 1.2 T…
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) Today you will learn the procedure for performing routine maintenance by replacing the engine oil and oil filter on the Renault Clio 1.5 dCi. First, …
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) In this video tutorial, you will learn how to remove the oil filter from a third-generation Renault Clio, and in the meantime, you will also change t…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos