Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Ignition motor replacement on Renault Scenic

Model: Renault Scenic MK 2, Scenic 2 - Years 2003-2009
Part: Starter motor

Replacing the starter motor of the Scenic? We disconnect the battery electrical terminals before removing the starter motor. We unscrew the locking pins of the starter motor, disconnect the terminals of the power supply of the starter with a pliers or screwdriver depending on the pressure. We detach the piece from its seat and remove it from the engine compartment. We fix the new starter motor with the tightening screws and with the connection of the power supply cables. We connect the battery power and test if the Scenic works or not. We turn the key and carry out the test.

Posted on 21 September 2020 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the electronic handbrake of the Renault Scenic?
How do you reset the electronic handbrake of the Renault Scenic?
Renault Scenic (2009-2015 / Scenic 3, Scenic III, MK III, MK 3) In order to reset the handbrake of the Renault Scenic, you need to insert the ignition key into the ignition block and turn it to turn on the instrum…
Replacement of the starter motor of the Renault Scenic 1.6
Replacement of the starter motor of the Renault Scenic 1.6
Renault Scenic (1993-2003 / RX4, MK 1, Scenic 1) This brief guide will explain the procedure for disassembling and replacing the starter motor of the Renault Scenic 1.6. First, we open the car's eng…
How to reset the "Service" warning light on a Renault Scenic?
How to reset the "Service" warning light on a Renault Scenic?
Renault Scenic (2009-2015 / Scenic 3, Scenic III, MK III, MK 3) Before we can start, we will have to check that the service has been carried out, and then sit in the driver's seat of our Renault Scenic. Let's star…

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos