Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Service Light on Renault Trafic 2.0 DCi

Model: Renault Trafic MK 2 - Years 2001-2014
Part: Service warning light

In this tutorial video, you will find the instructions to reset the service light for the regular maintenance oil change on a first series Renault Trafic 2.0 DCi in simple steps. First, get in the vehicle and insert the key: then press the accelerator pedal fully and turn on the ignition, followed by pressing the brake pedal three times. Now turn off the ignition and release everything: then start the engine and check that the service light has indeed been reset!

Updated on 17 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Starter Motor in a Renault Trafic 2.5 DCI
Renault Trafic (2001-2014 / MK 2) Let’s go through the steps to remove and replace the starter motor in a Renault Trafic 2.5 DCI, following the instructions below. First, open the bon…
Replacing the Timing Belt on a Renault Trafic 1.9 dCi
Replacing the Timing Belt on a Renault Trafic 1.9 dCi
Renault Trafic (2001-2014 / MK 2) Today’s main instructions will allow us to remove and replace the timing belt on a Renault Trafic 1.9 dCi. In this specific case, the engine is remov…
Guide to replacing the battery of the Renault Trafic 1.6 dCi
Guide to replacing the battery of the Renault Trafic 1.6 dCi
Renault Trafic (2014-2026 / MK 3) Today we will discover the instructions that will allow us to disassemble and replace the battery of the Renault Trafic 1.6 dCi. First, we open the v…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos