Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Key Card Remote Battery of a Renault Megane 4

Model: Renault Megane Megane IV, Megane 4 - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Key

See other generations:
Video tutorial

This guide shows how to replace the battery of the car remote. First, remove the rear cover of the device, then apply slight pressure on the back of the remote and slide it towards the bottom (in the direction of the hole on the short side of the device).

At this point, you can access the internal circuitry. To replace the battery, simply lift the battery cover (a plastic disc) with pressure, and using a small screwdriver, lift out the battery to be replaced.

Insert the new battery (model CR2032) and reassemble the battery cover and the remote cover (following the initial procedure in reverse). The operation is now complete.


Updated on 1 May 2026 by ScegliAuto


Related tutorials

Remote Key Battery Replacement
Remote Key Battery Replacement
Renault Megane (2008-2015 / Megane III, Megane 3) To replace the battery in the remote key for this Renault model, known as the KEY CARD due to its card-like shape, handle it with care as it is made …
How to Replace the Card Battery of the Renault Megane 2?
How to Replace the Card Battery of the Renault Megane 2?
Renault Megane (2002-2010 / Megane 2) The card battery of the Renault Megane 2 can be replaced at any time as it does not require any tools. All you need is a replacement battery, which s…
Why is the Card of the Renault Megane 2 Not Recognised?
Why is the Card of the Renault Megane 2 Not Recognised?
Renault Megane (2002-2010 / Megane 2) On the Renault Megane, the ignition key has been replaced by a card, which has the central locking buttons. This card must be inserted into the desig…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos