Do it yourself
| ||||
|
Renault Clio - Video tutorial
Model: Renault Clio
Clio 2, MK 2
- Years 1998-2005 To perform a test of the injectors on a Renault Clio it is necessary to open the hood and loosen the high pressure unions and activate the starter motor, now tighten the unions through which the diesel flows. Now try starting the engine with brake cleaner by spraying into the air filter. An injector back-flow test can detect any leaks inside, so disconnect the fuel return lines, put a cap on the high-pressure pump connector, and connect four hoses to the injectors. Insert the hoses into an empty bottle and start the engine, if the bottles fill with fuel the injectors have a high flow back then they need to be replaced.
Posted on 30 May 2024 by ScegliAuto
How to replace the injectors on the Renault Clio 1.5 DCI
Renault Clio (1998-2005 / Clio 2, MK 2) Today we will see, in this video tutorial, the steps on how to disassemble and replace the diesel injectors of the Renault Clio 1.5 DCI. First we ope
How to replace the injectors of the Renault Clio
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) The guide shows how to replace the injectors of the Renault Clio 182. After opening the engine compartment, it is necessary to identify the position
How to replace the rear headlight bulb of Renault Clio 2.
Renault Clio (1998-2005 / Clio 2, MK 2) In the following guide, we will describe the various steps required to replace the rear headlight bulb of your Renault Clio Mk2 on your own and in th Other guides that may interest you
|
Frequently Asked QuestionsHow to reset the oil service in the Fiat Toro?In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.076
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |