Do it yourself
Frequently asked questions about cars and motorcycles
This video is currently unavailable

Follow this video closely, and it will guide you through replacing all the filters. Start with the air filter by unscrewing the screws of the cover.

Remove the cover and take out the filter to be replaced. Insert the new filter and close the filter box. Now, move on to the cabin air filter.

Remove the left grille under the windscreen and unscrew the cover screw. Take out the old filter and place the new one. Close the cover and then the grille.

Now locate the fuel filter as shown in the images. Disconnect the electrical connector.

Place a tray under the filter and unscrew the drain screw to remove any water deposits. Now loosen the air bleed screw and let the diesel flow out. Unscrew the filter cover screw.

Re-tighten the water drain screw, remove the cover, the gasket, and take out the filter. Insert the new filter, replacing all the gaskets.

Re-tighten the cover, reconnect the connector, and tighten the water drain screw. Loosen the air bleed screw a quarter turn.

Pump with the hand pump until diesel flows continuously from the bleed screw. Tighten this screw and continue pumping until you feel some resistance.

Start the engine and check that it runs correctly. Car model: Renault Megane 1.9 TD.


Updated on 12 February 2026 by ScegliAuto


Related tutorials

Renault Scenic (2009-2015 / MK III, Scenic III, Scenic 3, MK 3) Resetting the service light on the Renault Scenic should only be done after having the scheduled service performed at a workshop. The service include…
Renault Scenic (2009-2015 / MK III, Scenic III, Scenic 3, MK 3) The air filter is a component of the fuel system in your car and serves to filter and clean the air drawn from outside before it reaches the combusti…
Renault Scenic (2016-2022 / Scenic IV, Scenic 4, MK IV, MK 4) In this video tutorial, you will see how to reset the maintenance light on a Renault Grand Scenic. First, perform maintenance on the vehicle, such as…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos