Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Service Light on a Renault Clio 2 1.5 dCi

Model: Renault Clio Clio 2, MK 2 - Years 1998-2005
Part: Service warning light

Resetting the service light on a Renault Clio mk2 is a very simple operation that you can do yourself with ease. Remember, after resetting it, it is important to book a service with a mechanic. To begin, sit in the driver's seat and turn off the car's engine. Press and hold the 'Trip reset' button and turn the key to switch on the ignition. Keep it pressed for a few seconds until the lights and gauges stop moving. Once the operation is complete, the display on the dashboard will show 'oil ok'. Then turn off the ignition to correctly finish the operation.

Updated on 15 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the AdBlue refill warning light on the Renault Clio 1.5 dCi.
How to reset the AdBlue refill warning light on the Renault Clio 1.5 dCi.
Renault Clio (2019-2026 / Clio V, Clio 5) Let's discover the instructions that will allow us to reset the AdBlue refill warning for the Renault Clio 1.5 dCi. First of all, it is necessary to …
How do you reset the service light on the Clio 2 1.5 dci?
How do you reset the service light on the Clio 2 1.5 dci?
Renault Clio (1998-2005 / Clio 2, MK 2) The service light reset on the Renault Clio 2 1.5 dci is extremely simple, but it is important to remember that this operation should only be done af…
How to Reset the Service Light on Renault Clio 1.5 dCi
How to Reset the Service Light on Renault Clio 1.5 dCi
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) To reset the oil change service indicator on the Renault Clio dCi, proceed as follows: open the door and access the driver's seat, insert the ignitio…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos