|
Do it yourself
| |||
| ||||
Instructions for Replacing All Filters
Model: Renault Clio
MK 2, Clio 2
- Years:
1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
This video is currently unavailable
Start by removing the engine cover and disconnecting the intake duct from the filter box; then unscrew the fastening screws of the cover and extract the old filter, removing any dirt residues and applying the new filter, ensuring the gasket adheres perfectly and tightening the fastening screws. The cabin air filter is located just under the windscreen on the passenger side: remove the plastic cover and unscrew the fastening screws of the cover, extract the old filter and insert the new one, respecting the airflow direction. To replace the fuel filter, first drain the bowl through the bleed valve, disconnect the pipes, and remove the old filter, then fit the new one into its slot and reconnect the pipes, using the appropriate pump to fill the fuel filter before the first start.
Updated on 14 February 2026 by ScegliAuto
Related tutorials
Renault Clio
(1998-2005 /
MK 2, Clio 2)
In this guide, you will see the instructions that will allow you to remove and replace the motor and window regulator mechanism on a Renault Clio. Fi…
Renault Clio
(2005-2013 /
Clio 3, MK 3, Clio III)
Today, we will look at the instructions that will allow you to remove and replace the timing belt on the Renault Clio 1.5 DCI. First, raise the vehic…
Renault Clio
(1998-2005 /
MK 2, Clio 2)
This guide provides the main instructions for removing the roof lining or internal covering of the Renault Clio. First, get inside the vehicle and be…
Other guides you may be interested in
|
How to Remove the Rear Seat of a Hyundai Tucson?
To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.063
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |