Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Renault
  4. :
  5. Megane
  6. : How to replace the headlight bulbs in Renault Megane?

Renault Megane - Video tutorial

Model: Renault Megane Megane III, Megane 3 - Years 2008-2015
Part: Headlight bulb
Operation: How to replace the headlight bulbs in Renault Megane?

In this tutorial we can see how to replace the front headlight bulbs in Renault Megane, an extremely simple and fast operation. Before doing this, we disconnect the negative terminal of the battery in order to operate safely. Let's start by extracting the metal block located on the upper edge of the headlight in question, then let's use it to unscrew the two fixing bolts. We then separate the headlight from the bodywork, remove the large rear cap and disconnect the power connector. At this point we can release the metal clip, remove the bulb and insert the spare. Finally, we put everything back together following the reverse procedure.


Posted on 14 December 2022 by ScegliAuto



How to change the headlight bulbs of a Renault Megane
Renault Megane (2008-2015 / Megane III, Megane 3) Have we decided to replace the headlight bulbs of our Renault Megane? Let's see in this video how to proceed with the replacement of the lighting bul
How to replace the headlight bulbs of a Renault Megane
Renault Megane (2002-2010 / Megane 2) Let's replace the headlight bulbs of a Renault Megane: open the front hood by pulling the lever located at the bottom right of the dashboard, let's s
Replacement of the rear light bulbs of the Renault Megane.
Renault Megane (2008-2015 / Megane III, Megane 3) Let's see how to replace the rear headlight bulbs of the Renault Megane when one of them is burnt out. We open the rear hatch and position ourselves

Other guides that may interest you

    Frequently Asked Questions

    • Megane 2008-2015 - What is the fuse for the sidelights on my Renault Megane 3? Read Answer

How do you replace the horn on the Citroà «n Berlingo?

In order to replace the horn on the Citroà «n Berlingo, the vehicle must be raised so that the screws that secure the left front wheel can be loosened and removed completely. Once this wheel has been removed, it will be possible to access the screws that secure the internal cover of the corresponding wheel arch: this will have to be detached and it will be possible to access the components inside, including the horn. This will need to be disconnected from its connector and removed from its holders, so that it can be replaced with a new spare part.

Watch the video!


by ScegliAuto

More videos