Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Air Filter on the Renault Megane II

Model: Renault Megane Megane 2 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Air filter

See other generations:
Video tutorial

To keep the engine efficient and monitor fuel consumption, it is good practice to replace the air filter of the Renault Megane II at the scheduled maintenance intervals. To do this, open the bonnet of the engine compartment, you will find the filter box behind the battery, disconnect the electronic valve from its support and move it to the side, using a flat screwdriver, unscrew the two screws that secure the cover of the box, pull the cover towards you and remove it from its seat.

Take out the old filter element from its compartment and insert the new filter; place everything back in the box. Close the cover and tighten the two screws. Reposition the electronic valve.


Updated on 13 August 2026 by ScegliAuto


Related tutorials

When to Change the Diesel Filter on a Renault Megane
Renault Megane (2015-2023 / Megane IV, Megane 4) Replacing the diesel filter on a Renault Megane? Here’s how to do it. Lift the car on a column lift, and remove the protection panel. Locate the dies…
How to Replace the Air Filter of the Renault Megane
How to Replace the Air Filter of the Renault Megane
Renault Megane (2008-2015 / Megane III, Megane 3) To replace the air filter on a Renault Megane, first open the bonnet and then proceed to remove the air hose by releasing the clips on the side and t…
How to Replace the Engine Air Filter on a Renault Megane 3
How to Replace the Engine Air Filter on a Renault Megane 3
Renault Megane (2008-2015 / Megane III, Megane 3) If the engine of your Renault Megane Mk3 often overheats even at low revs, it is likely time to replace the air filter. In this guide, you will learn…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos