|
Do it yourself
| |||
| ||||
How to replace the serpentine belt on a Renault Clio IV
Model: Renault Clio
Clio IV, MK 4, Clio 4
- Years 2012-2019
In this video we can see how to replace the service belt on a Renault Clio IV gasoline: we open the hood of the car and disconnect the battery, unscrewing the negative terminal. We will also need to lift the vehicle in its front part, and remove the wheel from the passenger side. We will also need to remove the fender, in order to access the internal components: we can now see the accessory belt, which moves the alternator charging the battery, operates the power steering, the air conditioning compressor and the water pump. In this system there are two belts and they do not have tensioners. We cut the belts with a pair of pliers. We take the new belts, and pay attention, because the writing on the belts must rotate clockwise: We will start by installing the alternator belt on the inner race line of the shock absorber pulley. There is a special tool to install these belts, which makes the task easier, always rotating the pulley clockwise. The other belt must be mounted on the air conditioning compressor and on the outer race line of the shock absorber pulley. Now we can put the fender back in place and then the wheel. The job is done.
Posted on 25 June 2024 by ScegliAuto
Video tutorial
Related tutorials
Renault Clio
(2005-2013 /
MK 3, Clio 3, Clio III)
To replace the serpentine belt on a Renault Clio, lift the car using a ramp and loosen all the bolts securing the front right wheel to access the com…
Renault Clio
(2005-2013 /
MK 3, Clio 3, Clio III)
To replace the serpentine belt on a Renault Clio 3, lift the car and loosen the bolts securing the front right wheel. Once the wheel is removed, acce…
Renault Clio
(2012-2019 /
Clio IV, MK 4, Clio 4)
Today we will discover the instructions to remove and replace the timing belt on the petrol Renault Clio 1.2. First, open the bonnet and begin to dis…
Other guides you may be interested in
|
How to Reset the Central Locking of the Volkswagen Golf 4?
If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.183
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |