Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Oil Filter of a Renault Clio

Model: Renault Clio Clio IV, Clio 4, MK 4 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Oil filter

See other generations:
Video tutorial

In this video, learn how to change the engine oil along with the appropriate filter on a Renault Clio. Lift the car on a column lift and remove the plastic undertray using a Torx screwdriver. Locate the filter cover and the bolt beneath the oil sump next to the marked X. Unscrew it with a hex or square key; this will allow the oil to drain into a container for future disposal.

After allowing all the oil to drain, re-screw the bolt into the sump and move on to the oil filter. Unscrew the large black filter cover, remove the old filter, and insert the new one. Check that the cap has sealed properly onto the metal base.

Finally, top up the oil reservoir with new fluid, following the manufacturer's recommendations.


Updated on 26 February 2026 by ScegliAuto


Related tutorials

Renault Clio (1998-2005 / MK 2, Clio 2) Today, you will learn how to replace the engine oil and oil filter on your Renault Clio. First, remove the oil filler cap to avoid creating a vacuum …
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) Today you will learn the procedure for performing routine maintenance by replacing the engine oil and oil filter on the Renault Clio 1.5 dCi. First, …
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) In this video tutorial, you will learn how to remove the oil filter from a third-generation Renault Clio, and in the meantime, you will also change t…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos