|
Do it yourself
| |||
| ||||
|
In this video tutorial we will see how to associate the key on the Saab 9-3, in case you have replaced it with a new one. In the initial stages of the video we will see the replacement of the key shell and the battery; after which we will come to the point of having to associate our new key to the car. Then, extracting the mechanical key, we go to manually open our car, as shown in the video; then reinsert the key inside the remote control and insert the same into the ignition lock and put it in the "on" position. At this point we turn off and remove the key, verifying that it is associated!
Posted on 7 February 2021 by ScegliAuto
Video tutorial
Related tutorials
Saab 9 3
(2002-2014 /
MK 2)
Removing the key of a Saab 9 3. Let's see how to remove the key and replace the dead battery. We take our ignition key and go to extract the key insi…
Saab 9 3
(2002-2014 /
MK 2)
Before we are able to start, we will have to go and sit in the driver's seat of our SAAB 9-3. So let's start by disengaging and removing the air vent…
Saab 9 3
(2002-2014 /
MK 2)
The procedure for resetting the Service light on the Saab 9-3 is done by turning on the instrument panel and turning the appropriate key within its i…
Other guides you may be interested in
|
Installation of Upgraded Intercooler Radiator with Pipes
Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.116
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
