Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the car radio of a SAAB 9 3

Model: Saab 9 3 MK 2 - Years 2002-2014
Part: Car stereo

Before we are able to start, we will have to go and sit in the driver's seat of our SAAB 9-3. So let's start by disengaging and removing the air vents placed above the car radio, using a slotted screwdriver as a lever. After that, we will have to unscrew and remove the screws that secure the radio to the central dashboard. At this point, we will be able to extract the car radio of our SAAB 9-3 from its housing, and then disconnect the electrical connectors connected to it. When we have completed this step, we will have finished the disassembly.

Posted on 22 November 2021 by ScegliAuto

Video tutorial

Related tutorials

Installing an Aftermarket Radio in a Saab 9-3
Installing an Aftermarket Radio in a Saab 9-3
Saab 9 3 (2002-2014 / MK 2) To install an aftermarket radio, first remove the original unit. Purchase a fitting kit to insert into the dashboard and a universal wiring harness t…
How to manually set the time on the Saab 9-3?
How to manually set the time on the Saab 9-3?
Saab 9 3 (2002-2014 / MK 2) In this new mini guide dedicated to your Saab 9 3 second series (year 2008), we will discover how to manually change the time displayed on the centra…
Timing belt replacement on Saab 9 3
Timing belt replacement on Saab 9 3
Saab 9 3 (2002-2014 / MK 2) Has the timing belt of a Saab 9 3 reached the mileage limit and therefore needs to be removed? Let's see the disassembly of the belts. We open and li…

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos