Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove and Replace the Spark Plugs on a Seat Cordoba

Model: Seat Cordoba MK 1 - Years 1993-2002
Part: Spark plugs

In this video, see how to remove and replace the spark plugs on a Seat Cordoba. Open the engine bay, lift the front bonnet, and secure it. Disconnect the battery terminals. Remove the soundproofing panel (if present) and use a screwdriver to remove the coils from the engine head. Next, use a socket to undo the spark plugs and pull them out of the head. Take the new spark plugs and guide them into the engine head using the socket extension, tighten them, and reconnect the power coils to each spark plug. Test their proper operation.

Updated on 1 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Window Switch Panel on the Seat Cordoba - Ibiza
How to Replace the Window Switch Panel on the Seat Cordoba - Ibiza
Seat Cordoba (2002-2009 / MK 2) Follow the steps below to remove and replace the window switch panel on the Seat Cordoba, as well as the Seat Ibiza. First, open the front door and s…
How to Program the Key for the Seat Cordoba?
How to Program the Key for the Seat Cordoba?
Seat Cordoba (2002-2009 / MK 2) To program the key for the Seat Cordoba, insert the new blank key into the ignition switch: once inserted, connect a diagnostic tool to the vehicle's…
Where are the Fuses in a Seat Cordoba?
Where are the Fuses in a Seat Cordoba?
Seat Cordoba (2002-2009 / MK 2) The fuses in a Seat Cordoba are located within the designated fuse boxes in the vehicle. This model has two: one in the cabin and one in the engine c…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos