Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Installation of Aftermarket Xenon Bulb Accessory Kit

Model: Seat Ibiza 6L - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Xenon headlight kit

See other generations:
Video tutorial

Improving night visibility is always advisable, so obtain the necessary kit for the modification and proceed as follows. Remove the bumper and front grille from the vehicle.

Disassemble the headlight assembly and then remove the old bulbs. Open the packaging of the new bulb, taking care not to touch the glass bulb with your hands, and insert the bulb into the headlight, ensuring it aligns with the reference notches; the bulb must be fitted accurately and in the correct orientation.

Connect the bulb terminals to the connector and reassemble the protective cover of the headlight, making holes to install cable grommets. Replace the position lights with LED bulbs.

Next, connect the new wires to the kit's control unit. Secure the control unit in a location away from engine heat using plastic ties.

Check the proper operation and alignment of the headlights after the new installation.


Updated on 3 February 2026 by ScegliAuto


Related tutorials

Installation of Aftermarket Xenon Headlights
Installation of Aftermarket Xenon Headlights
Seat Ibiza (2002-2009 / 6L) Improving visibility at night is always advisable, so obtain the necessary kit and proceed as follows. Open the bonnet and remove the screws from the…
How to Remove the Front Bulbs from Headlights on a Seat Ibiza
How to Remove the Front Bulbs from Headlights on a Seat Ibiza
Seat Ibiza (2008-2017 / 6J, 6P) How do you remove the front bulbs from your Seat Ibiza? Let’s see how to remove the bulbs located in the front headlights. Lift the front bonnet, the…
Removing Headlight Bulbs on Seat Ibiza
Removing Headlight Bulbs on Seat Ibiza
Seat Ibiza (2008-2017 / 6J, 6P) Are the front headlight bulbs out? Here’s how to replace them on a Seat Ibiza. Open the front bonnet by pulling the lever located at the bottom right…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos