Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Timing Belt on a Seat Leon 1.4 16V

Model: Seat Leon 1P - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Timing belt

See other generations:
Video tutorial

Today we will see the useful instructions for removing and replacing the timing belt on the Seat Leon 1.4 16V. First, open the vehicle's bonnet and start removing the coolant reservoir and the engine mount by unscrewing the fixing screws; then lift the vehicle and disconnect the alternator belt, subsequently removing the crankshaft pulley, as shown in the video.

At this point, remove the timing cover to access the belt, taking references before carrying out the replacement; also replace the water pump if necessary.


Posted on 17 March 2026 by ScegliAuto


Related tutorials

Replacement of the timing belt of the Seat Leon 1.4 TSI
Replacement of the timing belt of the Seat Leon 1.4 TSI
Seat Leon (2012-2019 / 5F, MK 3) Let's see the information that will allow us to dismantle and replace the timing belt of the Seat Leon 1.4 TSI. First of all, we open the engine hood…
Guide to replacing the timing belt of the Seat Leon 1.4 TSI
Guide to replacing the timing belt of the Seat Leon 1.4 TSI
Seat Leon (2005-2013 / 1P) In this guide, we will see the instructions that will allow us to disassemble and replace the timing belt of the Seat Leon 1.4 TSI. First, let's open…
Can the tyre pressure reset be done in the Seat Leon?
Can the tyre pressure reset be done in the Seat Leon?
Seat Leon (2005-2013 / 1P) Noticing the tyre warning light on a vehicle means there is a specific issue with the inflation pressure, mainly due to a puncture, a flat tyre, or, …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos