|
Do it yourself
| |||
| ||||
The Solution for Fault P199D on Skoda Karoq
Model: Skoda Karoq
MK 1
- Years:
2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Video tutorial
The video highlights a crucial and often overlooked point regarding fault P199D (engine temperature regulation thermostat; open circuit) on the Skoda Karoq (also applicable to Seat Ateca and Volkswagen Tiguan). The code indicates an open circuit in the thermostat valve, but the most common cause is not a fault in the thermostat itself, but a wiring issue. The thermostat is located on the left side of the EA288 engine (looking from the front) at the bottom, near the timing belt, and has a 2 or 4 PIN electrical connector; follow the wiring harness from the thermostat connector, where it passes near contact with the exhaust manifold or other hot or sharp components. Look for signs of fraying or burns, where the harness rubs against a metal bracket or engine mount. Use a multimeter to measure an out-of-spec value; an infinite value (open circuit) confirms the component's failure.
Posted on 3 July 2026 by ScegliAuto
Related tutorials
Skoda Karoq
(2017-2026 /
MK 1)
In this guide, you will be assisted in completing the manual reset procedure for the service light on your Skoda Karoq. First, get into the car and i…
Skoda Karoq
(2017-2026 /
MK 1)
The function mentioned is undoubtedly an excellent control tool, for example, if we want to be sure of how many kilometers we have traveled to move f…
Skoda Karoq
(2017-2026 /
MK 1)
Mainly, the resetting mentioned above is useful when you want to effectively check the distance between one place and another, by reading how many ki…
Other guides you may be interested in
|
How to Remove the Rear Seat of a Hyundai Tucson?
To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.043
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
