Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Skoda
    3. :
  3. Octavia
    4. : Replacement brake discs and pads

Skoda Octavia - Video tutorial

Model: Skoda Octavia 1U, MK 1 - Years 1996-2004
Part: Brake discs
Operation: Replacement brake discs and pads

After disassembling the wheel with two wrenches, loosen the two locking nuts of the shoes and with the help of a ratchet wrench completely remove the bolts. Remove the jaws. With a screwdriver and hammer remove the protection in the center of the axle and with a ratchet wrench remove the bolt. Remove the brake disc. Lubricate the shaft and refit a new disc. Firmly tighten the disc retaining bolt with a torque wrench. Close the bolt cover and clean with a rag. Clean and lubricate the jaw pins. Refit the shoe supports by carefully retightening the bolts. Re-establish the position of the pistons by acting on the brake pedal.


Posted on 15 July 2023 by ScegliAuto

This video is currently unavailable


How to replace rear brake pads on Skoda Octavia 2
Skoda Octavia (2004-2012 / 1Z, MK 2) Thanks to these simple steps we can easily and do-it-yourself replace the rear brake pads on a second series Skoda Octavia. First we lift the car and
Replacement of front brake pads
Skoda Octavia (2004-2012 / 1Z, MK 2) To replace the front brake pads, lift the car on suitable car stands and remove the front wheel; therefore disconnect the wear sensor socket, remove
How to replace the rear brake pads on Skoda Octavia
Skoda Octavia (2004-2012 / 1Z, MK 2) Replacing the brake pads is certainly a maintenance that can be done do-it-yourself but you must pay close attention since the brakes certainly repre

How do you open the fuel flap of the Volkswagen Golf 5?

In order to open the fuel flap of the Volkswagen Golf 5, you need to press the appropriate button inside the passenger compartment, which is located in the rear part of the glove box on the driver's door. By pressing the button, the flap will unlock and it will then be possible to open it manually. Once the flap has been opened, the fuel tank access cap must be unscrewed. To close everything again, it will be sufficient to screw the tank cap again; subsequently, the flap must also be closed, pressing it so that it fits thanks to its locking mechanism.

Watch the video!


by ScegliAuto

More videos