Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the "Service" light on a Subaru Solterra?

Model: Subaru Solterra MK 1 - Years 2022-2026
Part: Service warning light

To reset the "Service" light on a Subaru Solterra, start the instrument panel without turning on the engine. Using the controls on the steering wheel, navigate to the main menu displayed on the central screen. Access the section dedicated to vehicle maintenance or reminders and locate the option to reset the service reminder. Select this option using the confirmation buttons and follow the instructions shown on the screen to complete the procedure. The system will take a moment to complete the operation and the "Service" light should turn off. Once finished, turn off and on the instrument panel to verify that the message no longer appears, confirming that the reset was successful and the system is updated to monitor the next maintenance intervals.

Posted on 15 June 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light in the Subaru Solterra?
How to Reset the Service Light in the Subaru Solterra?
Subaru Solterra (2022-2026 / MK 1) In this tutorial, see how to reset the service light in the Subaru Solterra, a very simple and quick operation to perform only after completing all s…
How to replace the battery of a Subaru Solterra key?
How to replace the battery of a Subaru Solterra key?
Subaru Solterra (2022-2026 / MK 1) To replace the battery of a Subaru Solterra key, start by locating the unlock button or release button on the key fob. Press this button to remove th…
How to darken the chrome badges of the Subaru Solterra DIY
How to darken the chrome badges of the Subaru Solterra DIY
Subaru Solterra (2022-2026 / MK 1) To darken the chrome badges of the Subaru Solterra, you need to work calmly on the rear bodywork. First, clean and degrease the area around the lette…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos