Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Subaru
    3. :
  3. Forester
    4. : How do you reset the Oil Service light on the Subaru Forester?

Subaru Forester - Video tutorial

Model: Subaru Forester MK 4, SJ - Years 2012-2019
Part: Checks and maintenance
Operation: How do you reset the Oil Service light on the Subaru Forester?

To reset the Oil Service light on the Subaru Forester, you need to turn on the instrument panel by turning the appropriate key inside the ignition switch. Once the panel is turned on, you will need to navigate through the menu that appears on the display in the center of the dashboard using the buttons on the left side of the steering wheel. At this point, when the option with the remaining oil life appears, you can press and hold the SET button until it is reset. After the reset, you can turn off the instrument panel to confirm the operation.


Posted on 8 January 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Forester 2012-2019 - What probable problems have emerged in the past with the 2012 Subaru Forester? Read Answer
    • Forester 2012-2019 - What are the main problems with the Subaru Forester? Read Answer
    • Forester 2012-2019 - What does the Subaru Forester check engine light mean? Read Answer
    • Forester 2012-2019 - What problems can the LPG Subaru Forester have? Read Answer
    • Forester 2008-2011 - What problems might the Subaru Forester 2.0 diesel present? Read Answer
    • Forester 2002-2008 - How much does the service cost of the Subaru Forester 1600 petrol? Read Answer

How to adjust the time and date of the Peugeot 3008

To set the time on the Peugeot 3008 you must use the radio controls on the dashboard; let's start by pressing the "menu" key, with the arrow to the right or left we go to "personalization-configuration" and press the "ok" key; use the down or up arrow to go to "viewer configuration" and press the "ok" button; use the up or down arrow to go to "time and date setting" and press the "ok" button; now we can start changing the date first, moving the arrow down or up, to change the day first, then the month, then the year, then the hour, then the minutes and finally the time format by confirming each selection with the "ok" key.

Watch the video!


by ScegliAuto

More videos