Do it yourself
| ||||
|
Suzuki Baleno - Video tutorial
Model: Suzuki Baleno
MK 1
- Years 1995-2007 How to replace the fuel pump if it is damaged? Let's see the disassembly of the pieces to make the replacement. We remove the engine soundproofing panel, close the fuel access to the engine. We disconnect the battery cables, then, we remove the seats of the rear seats of the car. Unscrew the tightening screws of the metal cap (if present) with a socket wrench, remove it from its seat, cover the perimeter with absorbent paper for any liquid leaks. Disconnect the power supply terminals and the liquid circulation pipes and extract the fuel pump from its seat with the attached pieces. We mount the new pump in the tank of the car.
Posted on 28 December 2023 by ScegliAuto
Other guides that may interest you
|
How to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.045
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |