Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlight Bulb on a Tata Zest?

Model: Tata Zest MK 1 - Years: 2014, 2015, 2016, 2017, 2018, 2019
Part: Headlight bulb

Video tutorial

To replace the headlight bulb on a Tata Zest, open the hood to access the components inside the engine compartment. The bulb is located inside the headlight.

To remove it, disconnect the connector attached to the inside of the headlight. Once the connector is disconnected, you can pull the bulb out of its housing and replace it with a new part.

Insert the new bulb into the headlight, close the hood, and check that the device functions correctly.


Updated on 16 May 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Light Bulb on a Tata Zest?
How to Replace the Rear Light Bulb on a Tata Zest?
Tata Zest (2014-2019 / MK 1) To replace the rear light bulb on a Tata Zest, open the trunk lid to detach the carpet cover located near the light. Once removed, you can unscrew th…
How to Replace the Cabin Air Filter on Tata Zest
How to Replace the Cabin Air Filter on Tata Zest
Tata Zest (2014-2019 / MK 1) To replace the cabin air filter on the Tata Zest, you need to remove the panel on the side of the footwell on the driver's side, near the center cons…
How to Replace the Oil Filter on a Tata Zest?
How to Replace the Oil Filter on a Tata Zest?
Tata Zest (2014-2019 / MK 1) To replace the oil filter on a Tata Zest, open the hood to access the components inside the engine compartment. You will need to remove the plastic c…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos