Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Starter Motor on a Tata Sumo

Model: Tata Sumo Victa - Years 2004-2011
Part: Starter motor

If you want to replace the starter motor on this vehicle, refer to the instructions below and also check the video. Start by opening the hood and disconnecting the positive terminal of the battery for safety. Locate the starter motor on the left side of the engine just above the transmission, disconnect the positive terminal from the starter first, then the other terminal. Next, remove the bolts securing the starter to the transmission. At this point, you can pull the starter out of the engine compartment and proceed with its replacement if necessary.

Updated on 23 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Headlight Bulb on a Tata Sumo
How to Replace the Headlight Bulb on a Tata Sumo
Tata Sumo (2004-2011 / Victa) To replace the headlight bulb on a Tata Sumo, open the hood to access the components inside the engine compartment. Specifically, remove the circular…
How to Replace the Oil Filter on a Tata Sumo?
How to Replace the Oil Filter on a Tata Sumo?
Tata Sumo (2012-2019 / Gold) To replace the oil filter on a Tata Sumo, access the lower part of the engine compartment near the left front wheel. Here, locate the oil filter, whi…
Where to Find the Fuse Box of the Tata Sumo
Where to Find the Fuse Box of the Tata Sumo
Tata Sumo (2008-2016 / Grande) If you are looking for the fuse box in your Tata Sumo but haven't found it yet, don't worry because this guide will help you resolve any doubts. Firs…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos