Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Water Pump on a Tata Safari Storme?

Model: Tata Safari Storme MK 1 - Years 2012-2019
Part: Pump

To replace the water pump on a Tata Safari Storme, access the left side of the engine block where the timing belt is located: this will need to be removed from its housing to access the pulley corresponding to the water pump. This way, the mounting screws of the pump can be loosened, and the pump itself can be removed from its seat, replacing it with a new part. The new pump should be secured with the appropriate screws, and then the timing belt can be reinstalled around it.

Updated on 17 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the ECU on the Tata Safari Storme
How to Replace the ECU on the Tata Safari Storme
Tata Safari Storme (2012-2019 / MK 1) To replace the ECU on the Tata Safari Storme, open the hood to access the components inside the engine bay. The ECU is located immediately behind the…
How to Replace the Fuel Filter on Tata Safari Storme
How to Replace the Fuel Filter on Tata Safari Storme
Tata Safari Storme (2012-2019 / MK 1) This guide will show you how to remove and replace the fuel filter on the Tata Safari Storme. First, open the hood and locate the fuel filter; you wi…
How to Replace the Remote Battery in the Tata Safari Storme?
How to Replace the Remote Battery in the Tata Safari Storme?
Tata Safari Storme (2012-2019 / MK 1) Replacing the remote battery in the Tata Safari Storme, as shown in this tutorial, is an extremely simple and quick task. To do this, you will only n…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos